Labeling A Cd; Disc Memo - Sony MDX-C7970 Operating Instructions Manual

Labeling a CD

(For a CD unit with the custom file function)
You can label each disc with a personalized
name. You can enter up to eight characters for
a disc. If you label a CD, you can locate the
disc by name and select the specific tracks for
playback (page 19).
1
Play the CD and press
seconds.
2
Enter the characters.
1 Rotate the dial clockwise to select the
desired characters.
(A n B n C n ··· Z
··· 9 n + n –
n . n _ )
If you rotate the dial counterclockwise,
the characters will appear in reverse
order.
If you want to put a blank space
between characters, select "_" (under-
bar).
2 Press (5) ( n) after locating the
desired character.
The flashing cursor moves to the next
space.
If you press (2) (N), the flashing cursor
moves to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
3
To return to normal CD playback mode,
press (LIST) for two seconds.
Tip
To erase or correct a name, enter "_" (under-bar)
for each character.
18

— Disc Memo

(LIST) for two
n 0 n 1 n 2 n
n * n / n \ n > n <
Displaying the disc memo
Press (DSPL) during CD or CD TEXT disc
p l a y b a c k .
Each time you press (DSPL) during CD or
CD TEXT disc playback, the item changes
as follows:
Track number/
Elapsed playback time
Disc memo name
Track name*
Clock
* If you connect an optional CD unit with the
CD TEXT function, the CD TEXT information
will appear in the display when you play a
CD TEXT disc.
Erasing the disc memo
1
Press (SOURCE) repeatedly to select CD.
2
Press (MODE) repeatedly to select the CD
u n i t .
3
Press (LIST) for two seconds.
4
Press (DSPL) for two seconds.
5
Rotate the dial to select the name you
want to erase.
6
Press (6) (ENTER) for two seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press (LIST) for two seconds.
The unit returns to normal CD playback
mode.
Note
When a personalized label is erased, the original
CD TEXT information will appear in the display.
$
$
$
$