Changing The Sound And Beep Tone; Cd/Md Unit; Playing A Cd/Md - Sony XR-C6090 Operating Instructions Manual

Changing the sound and
beep tone
Boosting the bass sound — D-bass
You can enjoy clear and powerful bass sound.
The D-bass function boosts the low frequency
signal with a sharper curve than conventional
bass boost.
You can hear the bass line more clearly even if
the vocal volume remains the same. You can
emphasize and adjust the bass sound easily
with the D-bass control. This effect is similar to
the one you get when you use an optional
subwoofer system.
Moreover, the Digital D-bass* function creates
even sharper and more powerful bass sounds
than Analog D-bass.
Digital D-BASS
D-BASS 3
D-BASS 2
D-BASS 1
0dB
Frequency (Hz)
Adjusting the bass curve
Turn the D-BASS control to adjust the
bass level (1, 2 or 3).
"D-BASS"* appears in the display.
To cancel, turn the control to the OFF position.
* If the CD changer has the digital D-bass function,
"DIGITAL D-BASS" appears on the display during CD
playback.
Note
If the bass sound becomes distorted, adjust the D-BASS
control or volume button.
Attenuating the beep tone
Press (6) while pressing (SEL).
To obtain the beep tone again, press these
buttons again.
Note
If you connect an optional power amplifier to the LINE
OUT and do not use the builtin amplifier, the beep tone
will be disabled.
Analog D-BASS
D-BASS 3
D-BASS 2
D-BASS 1
0dB
Frequency (Hz)
With Optional Equipment

CD/MD Unit

This unit can control a maximum of seven
external CD/MD units in this configuretion:
CD unit - maximum of five
MD unit - maximum of five.
Any combination up to seven will work.

Playing a CD/MD

Press (SOURCE) until the desired unit
indication appears on the display.
CD/MD playback starts.
When a CD/MD unit is connected, all the
tracks play from the beginning.
Selecting CD/MD units (when
several CD/MD units are connected)
Press (MODE) repeatedly to select the desired
CD/MD unit.
Changing the displayed items
Each time you press (DSPL) during CD/MD
playback, the item changes as follows:
Elapsed playback time
Disc name*
Track name*
Clock
1
* If there is no prerecorded name for a CD or MD, "NO
NAME" appears in the display.
2
If the track name of an MD is not prerecorded "NO
*
NAME" appears in the display.
Tip
If the name of the MD is too long, only the first eight
characters appear in the display.
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS) once for each track you wish
to skip the tracks.
SEEK
AMS
To locate the
preceeding tracks
continue to next page n
$
$
1
$
2
$
To locate the
succeeding tracks
EN
11