Page 1
XR-C6120 SERVICE MANUAL US Model Canadian Model Dolby noise reduction manufactured under license Model Name Using Similar Mechanism XR-C5100 from Dolby Laboratories Licensing Corporation. Tape Transport Mechanism Type MG-25F-136 “DOLBY” and the double-D symbol a are trade- marks of Dolby Laboratories Licensing Corporation.
Page 2
XR-C6120 6-3. SCHEMATIC DIAGRAM – MAIN Board (1/2) – • See page 29 for Waveforms. • See page 27 for IC Block Diagrams. – 19 – – 20 –...
Page 3
XR-C6120 6-4. SCHEMATIC DIAGRAM – MAIN Board (2/2) – • See page 28 for IC Block Diagrams. (Page 25) – 21 – – 22 –...
Rotary remote commander shift key input terminal “L”: shift SYSRST Reset signal output to the SONY bus interface (IC581) “L”: reset BUS-ON Bus on/off control signal output to the SONY bus interface (IC581) “L”: bus on UNISO Serial data output to the SONY bus interface (IC581) UNISI...
Page 8
Pin No. Pin Name Function BEEP Beep sound drive signal output terminal AMP-MUT Muting on/off control signal output to the power amplifier (IC751) “L”: muting on Standby on/off control signal output to the power amplifier (IC751) AMP ON “L”: standby mode, “H”: amp on PLL-CKO PLL serial data transfer clock signal output to the FM/AM PLL (IC21) PLL-CE...
Page 9
Pin No. Pin Name Function POS3 Tape position (EJECT/FF/REW/ POS3: “L”: REV and EJECT mode, “H”: others mode POS2 REV/FWD mode) detect input from POS2: “L”: REW mode, “H”: others mode the tape operation switch on the POS0: “L”: EJECT mode, “H”: others mode POS0 deck mechanism POS1: “L”: FF and FWD mode, “H”: others mode...