Eaton SBN-508 Instructions For Installation, Operation And Maintenance page 70

Instructional Leaflet
Effective March 2012
Disclaimer of warranties and limitation of liability
The information, recommendations, descriptions, and safety
notations in this document are based on Eaton Corporation's
("Eaton") experience and judgment, and may not cover all
contingencies . If further information is required, an Eaton sales
office should be consulted .
Sale of the product shown in this literature is subject to the terms
and conditions outlined in appropriate Eaton selling policies or
other contractual agreement between Eaton and the purchaser .
THERE ARE NO UNDERSTANDINGS, AGREEMENTS,
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR
MERCHANTABILITY, OTHER THAN THOSE SPECIFICALLY SET
OUT IN ANY EXISTING CONTRACT BETWEEN THE PARTIES . ANY
SUCH CONTRACT STATES THE ENTIRE OBLIGATION OF EATON .
THE CONTENTS OF THIS DOCUMENT SHALL NOT BECOME
PART OF OR MODIFY ANY CONTRACT BETWEEN THE PARTIES .
70 EATON CORPORATION www.eaton.com
IB2C12063H03
Eaton Corporation
Electrical Group
1000 Cherrington Parkway
Moon Township, PA 15108
United States
877-ETN-CARE (877-386-2273)
Eaton.com
© 2011 Eaton Corporation
All Rights Reserved
Printed in USA
Publication No. IB2C12063H03
March 2012
Instructions for Installation, Operation and
Maintenance of Magnum SB Insulated Case
Low Voltage Power Circuit Breakers
In no event will Eaton be responsible to the purchaser or user in
contract, in tort (including negligence), strict liability, or otherwise
for any special, indirect, incidental, or consequential damage
or loss whatsoever, including but not limited to damage or loss
of use of equipment, plant or power system, cost of capital,
loss of power, additional expenses in the use of existing power
facilities, or claims against the purchaser or user by its customers
resulting from the use of the information, recommendations, and
descriptions contained herein .
The information contained in this manual is subject to change
without notice .
Power Chain Management is a registered
Trademark of Eaton Corporation
All other Trademarks are property of their
respective owners .