DURKOPP ADLER 867 Instruction Manual page 40

Key Function
9 Function key
The function of the key can be altered with
parameter F-008 (see parameter list in section
1 4)
1 = Softstart ON/OFF
2 = ornamental-stitch bar tack ON/OFF
3 = stroke adjustment
Function of the knee-switch or key:
”press and release” = ON / ”press and hold” =
OFF
4 = needle cooling ON/OFF
5 = handwheel reverse ON/OFF
0 Teach in or
Sew stored sewing program
see programming instructions in the EFKA
DA82GA 3301 operating manual
A Suppress or trigger bar tacks
If the starting or ending bar tack is switched on,
pressing the key switches the next bar tack off
If the starting or ending bar tack is switched off,
pressing the key switches the next bar tack on
B Needle up/down
or shift function in programming mode
Pressing this key executes a needle movement
that can be programmed with parameter 140
See the parameter list in the set-up
instructions
In programming mode this key has a different
function: see set-up instructions
P Programming mode on/off
for description see set-up instructions
E Switch from parameter number to parameter
value
Confirm parameter value and switch to next
parameter
For description see set-up instructions
+ Increase the value displayed in programming
mode
- Decrease the value displayed in programming
mode
38
All manuals and user guides at all-guides.com
Display
SSt ON*/OFF < - > SSc xxx
SrS ON*/OFF
hPr ON*/OFF
nh ON*/OFF
rd ON*/OFF
* when ON the left arrow above
the key is switched on
Program number
Seam-section number
Seam-section stitch number
Number of stitches after light-barrier
detection
No display
No display
Parameter number/standard display
Parameter number/standard display
Displayed value is increased
Displayed value is decreased