DURKOPP ADLER 867 Instruction Manual page 37

7.2.2 Key functions on the V8 0 operating panel
Key Function
1 Double starting bar tack on
Starting bar tack off
Single starting bar tack on
2 Double ending bar tack on
Ending bar tack off
Single ending bar tack on
3 Auto foot-lift on halt in seam on
Auto foot-lift on halt in seam off
Auto foot-lift after thread cut on
Auto foot-lift after thread cut off
4 Basic needle position = down
Basic needle position = up
A Suppress or trigger bar tack
If the starting or ending bar tack is switched on,
pressing the key switches the next bar tack off
If the starting or ending bar tack is switched off,
pressing the key switches the next bar tack on
B Needle up/down
or shift function in programming mode
Pressing this key executes a needle movement
that can be programmed with parameter 140
See the parameter list in the set-up instructions
In programming mode this key has a different
function: see set-up instructions
P Programming mode on/off
for description see set-up instructions
E Switch from parameter number to parameter value
Confirm parameter value and switch to next
parameter
For description see set-up instructions
+ Increase the value displayed in programming
mode
- Decrease the value displayed in programming
mode
7.2.3 Meaning of symbols on the V8 0 operating panel
Symbol Function
C Automatic speed active
Only seam sectors processed automatically
D Light barrier switched on
E Sewing drive switched on
F Rotation-speed limit active
G Bobbin-thread monitor switched on
All manuals and user guides at all-guides.com
Functions can be turned on and off by briefly pressing the keys on the
operating panel
relevant devices (e g
are present
The functions are effective on the machine only if the
magnetic or electro-pneumatic sewing-foot lift)
Display
Right arrow above the key on
Both arrows off
Left arrow above the key on
Right arrow above the key on
Both arrows off
Left arrow above the key on
Left arrow above the key on
Left arrow above the key off
Right arrow above the key on
Right arrow above the key off
Left arrow above the key on
Right arrow above the key on
No display
No display
Parameter number/standard display
Parameter number/Parameter value
Displayed value is increased
Displayed value is decreased
Display
Symbol on
Symbol on
Symbol on
Symbol on
Symbol flashes when bobbin is running out
*
35