I/O Nodes (Xml Node Type 21, 31, 51, 61) - Siemens MM8000 Integration Manual

Integrating a DVR
2.4.3

I/O nodes (XML node TYPE 21, 31, 51, 61)

Building Technologies
Fire Safety & Security Products
</properties>
The TYPE and ID attributes must correspond with the folder type:

Video Input Folder: TYPE 20, ID 1000

Video Output Folder: TYPE 30, ID 2000

Alarm Input Folder: TYPE 50, ID 3000

Alarm Output Folder: TYPE 60, ID 4000
According to the Composer requirements, both a Customer Text and a Technical
Text must be specified.
Individual inputs and outputs points may or may not be predefined in the XML be-
cause they can also be inserted in Composer as many times as required up to the
defined limit.
For example, the XML structure for a video output can be:
node ID="2001" TYPE="31">
<properties>
<property ID="CustomerText">
<item VAL="Video Output #1" />
</property>
<property ID="TechText">
<item VAL=" Video-out 1" />
</property>
</properties>
The TYPE and ID attributes must correspond with the I/O type:

Video Input Folder: TYPE 21, ID 1001-1256

Video Output Folder: TYPE 31, ID 2001-2256

Alarm Input Folder: TYPE 51, ID 3001-3256

Alarm Output Folder: TYPE 61, ID 4001-4256
According to the Composer requirements, both a Customer Text and a Technical
Text must be specified.
Individual video-in web address
When the model is set for using a custom address for each video input (web ad-
dress type = 2), a web address is required for each video In. In this type of configu-
ration, the WEBAddress is a property of each video input node.
The following XML property line can be added to each video input to predefine the
web address:
<property ID=" VideoInputWEBAddress">
<item VAL="rtsp://www.intr1/vgmaker/cam112dome/video.gci"/>
</property>
Users can enter, if not predefined, or modify the predefined address in Composer.
048_DMS_DMS8000_Generic_DVR_Integration_Guide_MP4.50_A6V10331273_a_en
11
06.2012