Sony Xplod CDX-M800 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. CD Player
  5. CDX-M800
  6. Service manual

Sony Xplod CDX-M800 Service Manual

Fm/am compact disc player, fm/mw/lw compact disc player
Hide thumbs Also See for Xplod CDX-M800:
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
Ver 1.0 2003. 01
• The tuner and CD sections have no adjustments.
AUDIO POWER SPECIFICATIONS (US MODEL)
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
23.2 watts per channel minimum continuous average power into
4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more
than 5% total harmonic distortion.
CD player section
Signal-to-noise ratio
Frequency response
Wow and flutter
Tuner section
FM
Tuning range
Antenna terminal
Intermediate frequency 10.7 MHz/450 kHz
Usable sensitivity
Selectivity
Signal-to-noise ratio
Harmonic distortion at 1 kHz
Separation
Frequency response
AM (US, Canadian model)
Tuning range
Antenna terminal
Intermediate frequency 10.7 MHz/450 kHz
Sensitivity
9-874-299-01
2003A0400-1
© 2003. 01
Get user manuals:
See SafeManuals.com
SPECIFICATIONS
90 dB
10 – 20,000 Hz
Below measurable limit
87.5 – 107.9 MHz (US, Canadian model)
87.5 – 108.0 MHz (AEP, UK, E model)
External antenna connector
9 dBf
75 dB at 400 kHz
67 dB (stereo),
69 dB (mono)
0.5% (stereo),
0.3% (mono)
35 dB at 1 kHz
30 – 15,000 Hz
530 – 1,710 kHz
External antenna connector
30 µV
Sony Corporation
e Vehicle Company
Published by Sony Engineering Corporation
CDX-M800
Model Name Using Similar Mechanism
CD Drive Mechanism Type
Optical Pick-up Name
MW/LW (AEP, UK, E model)
Tuning range
MW: 531 – 1,602 kHz
LW: 153 – 279 kHz
Aerial terminal
External aerial connector
Intermediate frequency 10.7 MHz/450 kHz
Sensitivity
MW: 30 µV
LW: 40 µV
Power amplifier section
Outputs
Speaker outputs (sure seal connectors)
Speaker impedance
4 – 8 ohms
Maximum power output 52 W × 4 (at 4 ohms)
General
Outputs
Audio outputs (front/rear)
Subwoofer output (mono)
Power antenna relay
control terminal (US, Canadian model)
Power aerial relay
control terminal (AEP, UK, E model)
Power amplifier control
terminal
FM/AM COMPACT DISC PLAYER
FM/MW/LW COMPACT DISC PLAYER
US Model
Canadian Model
AEP Model
UK Model
E Model
CDX-L410X/L490X
MG-393XC-121//K
KSS-721A
– Continued on next page –
US, Canadian Model
AEP, UK, E Model
1

Advertisement

Table of Contents
loading

Related Manuals for Sony Xplod CDX-M800

Summary of Contents for Sony Xplod CDX-M800

  • Page 1 Intermediate frequency 10.7 MHz/450 kHz FM/AM COMPACT DISC PLAYER Sensitivity 30 µV US, Canadian Model FM/MW/LW COMPACT DISC PLAYER AEP, UK, E Model Sony Corporation 9-874-299-01 2003A0400-1 e Vehicle Company © 2003. 01 Published by Sony Engineering Corporation Get user manuals: See SafeManuals.com...
  • Page 2 DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY. Get user manuals:...
  • Page 3 CDX-M800 AEP, UK, E model: Notes on CD-R/CD-RW discs • You can play CD-Rs (recordable CDs)/CD-RWs (rewritable CDs) designed for audio use on this unit. Look for these marks to distinguish CD-Rs/CD-RWs for audio use. This label is located on the bottom of the chassis. These marks denote that a disc is not for audio use.
  • Page 4 CDX-M800 EXTENSION CABLE AND SERVICE POSITION When repairing or servicing this set, connect the jig (extension cable) as shown below. • Connect the MAIN board (CNP301) and the SERVO board (CN1) with the extension cable (Part No. J-2502-062-1). MAIN BOARD CNP301 SERVO BOARD CN1 Get user manuals: See SafeManuals.com...

  • Page 5: Table Of Contents

    CDX-M800 TABLE OF CONTENTS 1. GENERAL 4. DIAGRAMS Location of Controls ..............6 4-1. IC Pin Descriptions ............18 Connection example (US, Canadian Model) ......6 4-2. Block Diagram –CD Section– ........... 21 Connections (US, Canadian Model) ........7 4-3. Block Diagram –Tuner Section– ........22 4-4.

  • Page 6: General

    *1 When an optional MD unit is connected. t EQ7 button b Main display window g SEEK (</,) buttons *2 Available only when an optional Sony portable u SOUND button c IMAGE button 20 device is connected to BUS AUDIO IN of the unit.

  • Page 7: Connections (Us, Canadian Model)

    CDX-M800 Connections (US, Canadian Model) Source selector (not supplied) Sélecteur de source Supplied with the CD/MD changer (non fourni) Fourni avec le changeur de CD/MD Selector de fuente Suministrado con el cambiador de CD/MD (no suministrado) XA-C30 BUS AUDIO IN AUDIO OUT RCA pin cord (not supplied) /AUX IN...

  • Page 8: Disassembly

    CDX-M800 SECTION 2 DISASSEMBLY Note : This set can be disassemble according to the following sequence. 2-7. CHASSIS (T) SUB ASSY 2-1. FRONT PANEL ASSY (Page 11) (Page 8) 2-8. LEVER SECTION, 2-2. CD MECHANISM BLOCK, IN SELF SW BOARD FRONT PANEL ASSY (Page 12) (Page 9)

  • Page 9: Cd Mechanism Block, Front Panel Assy

    CDX-M800 2-2. CD MECHANISM BLOCK, FRONT PANEL ASSY 7 bracket (CD) 5 CD mechanism block 6 PTT 2.6x6 8 tension spring (flexible) 0 cover (flexible) 9 slider (flexible) 3 PTT 2.6x4 qa CNP909 slider (flexible) flexible board Note: When installing the flexible board, 2 PTT 2.6x4 make the board slack...

  • Page 10: Motor Block Assy, Cam (R) Assy

    CDX-M800 2-4. MOTOR BLOCK ASSY, CAM (R) ASSY Note : Install the motor block assy and cam (R) assy in this roder. For phase alignment between cams (L) and (R), see page 15 and 17. 1 PTT 2.6x6 Note: Install the cam (R) assy with 4 PTT 2.6x6 the cam fully rotated in the direction of the arrow A .

  • Page 11: Heat Sink

    CDX-M800 2-6. HEAT SINK 5 heat sink 4 PTT 2.6x6 3 PTT 2.6x12 1 PTT 2.6x6 2 PTT 2.6x6 2-7. CHASSIS (T) SUB ASSY 2 P 2x3 3 P 2x3 1 Unsolder the 4 chassis (T) sub assy lead wires. black white Get user manuals:...

  • Page 12: Lever Section, In Self Sw Board

    CDX-M800 2-8. LEVER SECTION, IN SELF SW BOARD 5 guide (disc) 6 lever (R) 3 tension spring (LR) 7 lever (L) 1 special screw 2 IN SELF SW board 4 claws 2-9. SERVO BOARD 8 SERVO board 7 special screw 6 special screws 2 Removal the solders.

  • Page 13: Shaft Roller Assy, Load Sw Board

    CDX-M800 2-10. SHAFT ROLLER ASSY, LOAD SW BOARD 3 retaining ring (RA) shaft retainer (roller) washer 4 shaft retainer (roller) retaining washer shaft retainer ring (RA) (roller) Fig. 1 6 special screw 5 shaft roller assy 2 arm (roller) 7 LOAD SW board 1 tension spring (RA) 2-11.

  • Page 14: Optical Pick-Up Block

    CDX-M800 2-12. OPTICAL PICK-UP BLOCK 4 screw 1 P 2x3 5 plate spring (feed) 2 sled motor assy 3 optical pick-up block 6 shaft (feed) assy Get user manuals: See SafeManuals.com...

  • Page 15: Phase Alignment

    CDX-M800 SECTION 3 PHASE ALIGNMENT 3-1. ARM (A-L) ASSY, ARM (B-L) ASSY 3 arm (A-L) assy 4 type-E stop ring 1.5 2 type-E stop ring 1.5 1 arm (B-L) assy bracket (L) assy 3-2. CAM (L) 1 Move the arm (B-L) assy in the direction of the arrow A and the arm (A-L) assy in the direction of 3 type-E stop ring 1.5 the arrow B fully (full open state).

  • Page 16: Motor Block

    CDX-M800 3-3. MOTOR BLOCK 1 Turn the cam (L) and position the cam so that part A does not touch the SW board SW900. 3 PTT 2.6x6 4 PTT 2.6x6 2 motor block SWITCH board 5 PTT 2.6x6 SW900 cam (L) 3-4.

  • Page 17: Arm (A-R) Assy, Arm (B-R) Assy

    CDX-M800 3-5. ARM (A-R) ASSY, ARM (B-R) ASSY 4 type-E stop ring 1.5 3 arm (A-R) assy 2 type-E stop ring 1.5 1 arm (B-R) assy bracket (R) assy 3-6. CAM (R) 3 type-E stop ring 1.5 1 Move the arm (B-R) assy in the direction of the arrow A and the arm (A-R) assy in the direction of the arrow B fully (full open state).

  • Page 18: Diagrams

    Electronic volume mute signal output I2C CKO Tuner/E-volume BUS clock output I2C SIO Tuner/E-volume BUS data output UNI SO SONY BUS data output UNI SI SONY BUS data input UNI CKO SONY BUS clock output TUNER ATT Tuner attenuate signal output...
  • Page 19 CDX-M800 Pin No. Pin Name Pin Description DST SEL2 Destination select signal input CD LM LO CD loading motor control signal output CD LM EJ CD eject motor control signal output CD RST CD servo reset signal output CD AO CD servo command/parameter discri.
  • Page 20 CDX-M800 • IC2 M30833FJGP-066 (DISPLAY SYSTEM CONTROL) (DISPLAY Board) Pin No. Pin Name Pin Description SYS RST Main chip enable input Not used. (Open) FL DATA3 FL serial data output Not used. (Open) FL CLK IN FL serial clock input BYTE L fixed terminal CNVSS...

  • Page 21: Block Diagram -Cd Section

    CDX-M800 4-2. BLOCK DIAGRAM — CD SECTION — RF AMP,DIGITAL SERVO DIGITAL SIGNAL PROCESSOR OPTICAL PICK-UP KSS-721A (Page 22) TUNER SECTION LOUT SYSTEM CONTROL ROUT IC303 (1/3) CONV R-CH DEMOD PACK TSTB DSUB CODE TSCK PROCESS CONV. CD TSO FORCUS CD TSI ERROR CD TCKO...

  • Page 22: Block Diagram -Tuner Section

    CDX-M800 4-3. BLOCK DIAGRAM — TUNER SECTION — PJ401 –1 BUS AUDIO ELECTRONIC VOLUME –2 IC401 Q408 R-CH SECTION –5 4 PDL (Page 21) 42 MDL AUDIO OUT –6 32 AC OUT L FRONT Q171 R-CH TUNER UNIT TUX501 31 AC IN L –3 OUT LR CN503...

  • Page 23: Block Diagram -Display Section

    CDX-M800 4-4. BLOCK DIAGRAM — DISPLAY SECTION — BUS INTERFACE SYSTEM CONTROL IC301 IC303 (3/3) CNP102 (BUS CONTROL IN) UNI SI DATA RECEIVE SIRCS 1 IC62 UNI SO D513 UNI CKO RECEIVE IC503 64 BUS ON KEY IN0 85 KEY IN BATT MATRIX KEY IN1 84...

  • Page 24: Circuit Boards Location

    CDX-M800 4-5. CIRCUIT BOARDS LOCATION THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) IN SELF SW board SL SW board for schematic diagram: • All capacitors are in µF unless otherwise noted. pF: µµF 50 WV or less are not indicated except for electrolytics SERVO board SWITCH board...

  • Page 25: Schematic Diagram -Cd Mechanism Section

    CDX-M800 • Refer to page 24 for Waveforms. 4-6. SCHEMATIC DIAGRAM — CD MECHANISM SECTION — • Refer to page 36 for IC Block Diagram. TP77 TP78 TP89 TP79 TP80 TP81 TP82 TP45 TP10 TP83 TP44 TP84 TP43 TP42 TP41 TP40 TP39 TP38...

  • Page 26: Printed Wiring Boards -Cd Mechanism Section

    CDX-M800 4-7. PRINTED WIRING BOARDS — CD MECHANISM SECTION — • Refer to page 24 for Circuit Boards Location. Get user manuals: See SafeManuals.com...
  • Page 27 CDX-M800 TP77 TP78 TP62 TP63 TP82 TP84 TP48 TP66 TP80 TP83 TP81 TP60 TP11 TP50 TP12 TP47 TP64 TP10 TP51 TP59 TP89 TP52 TP70 TP71 TP56 (Page 29) TP72 TP58 TP22 TP23 TP24 TP61 TP25 TP76 TP88 TP74 TP69 TP68 TP75 TP35 TP46...

  • Page 28: Printed Wiring Boards -Main Section

    CDX-M800 4-8. PRINTED WIRING BOARDS — MAIN SECTION — • Refer to page 24 for Circuit Boards Location. • Semiconductor Location Ref. No. Location Ref. No. Location (D101) E-10 (D832) (D102) E-10 (D843) (D103) E-10 D904 (D104) E-10 (D905) F-10 (D105) E-10 (D907)
  • Page 29 CDX-M800 PJ401 CNJ101 CNP102 CNP101 FB101 C215 IC201 F901 FB102 D110 D112 R445 CN904 C101 R442 R441 R440 R443 TUX501 R408 CN503 R103 CN903 TH100 D106 D117 C103 D115 C442 C505 C503 D109 D116 C506 D114 C226 BATT AEP,UK model L101 D111 R503...

  • Page 30: Schematic Diagram -Main Section (1/2)

    CDX-M800 • Refer to page 24 for Waveform. 4-9. SCHEMATIC DIAGRAM — MAIN SECTION (1/2) — • Refer to page 36 for IC Block Diagrams. C278 R440 R444 C206 C178 C207 R439 R443 C288 PJ401 R442 R446 C242 C188 C212 R203 R204 C214...

  • Page 31: Schematic Diagram -Main Section (2/2)

    CDX-M800 • Refer to page 24 for Waveform. 4-10. SCHEMATIC DIAGRAM — MAIN SECTION (2/2) — • Refer to page 36 for IC Block Diagrams. (Page 30) IC B/D Q101 D104 CNP102 IC301 TH100 C303 L301 R102 R101 (Page C101 C304 L303 R303...

  • Page 32: Printed Wiring Board -Sub Section

    CDX-M800 4-11. PRINTED WIRING BOARD — SUB SECTION — • Refer to page 24 for Circuit Boards Location. C535 C536 C537 R509 C540 R538 C539 R536 Q504 C538 IC503 SW501 FB503 R533 R531 D512 Q503 D514 (Page 29) CN501 D513 C535 CN502 •...

  • Page 33: Schematic Diagram -Sub Section

    CDX-M800 4-12. SCHEMATIC DIAGRAM — SUB SECTION — • Refer to page 37 for IC Block Diagrams. CN502 Q503 R532 R534 R531 R533 Q504 D512 SW501 D513 D514 C536 (Page 31) R536 R538 CN501 C537 C533 C535 R509 FB503 C538 C539 C540 D506...

  • Page 34: Printed Wiring Board -Display Section

    CDX-M800 4-13. PRINTED WIRING BOARD — DISPLAY SECTION — • Refer to page 24 for Circuit Boards Location. FL900 R971 C905 LED931 LED909 R941 C962 R988 R906 S909 R994 FB914 R981 C912 S931 D901 FB913 C908 D908 FB912 C914 R987 FB915 FB911 C904...

  • Page 35: Schematic Diagram -Display Section

    CDX-M800 • Refer to page 24 for Waveform. 4-14. SCHEMATIC DIAGRAM — DISPLAY SECTION — • Refer to page 37 for IC Block Diagrams. R946 R945 R951 R953 R936 R950 R952 R954 R956 R958 R955 R960 R957 R961 R959 R962 Q903 R929 LED917...

  • Page 36: Ic Block Diagrams

    CDX-M800 4-15. IC BLOCK DIAGRAMS IC1 µPD63711GC-8EU (SERVO Board) IC2 BA5810FP-E2 (SERVO Board) 71 70 BIAS LOADING PRE MICROCOMPUTER INTERFACE OPIN4+ FWD REV AGCI 50 C2D3 – OPIN4– COMPARATOR 49 C2D2 LDCONT CD-TEXT DECODER 48 C2D1 POWER OPOUT4 SUB-CODE PROCESSOR SAVE 47 C1D2 MEMORY...
  • Page 37 CDX-M800 IC201 TDA8588J/N1 (MAIN Board (1/2)) I2C BUS PGND3 IN_RL IN_FL SGND PROTECTION DIAGNOSTIC IN_FR IN_RR ACGND PGND2 STANDBY MUTE CHIP DETECT PGND1 DIAGNOSTIC BATTERY TEMPERATURE DIAG ENABLE DETECTION PROTECTION LOGIC SWITCH CRES SWITCH AU8V SERVO MECHA DISP+B REFERENCE VOLTAGE LOADDUMP BACK-UP U-COM...
  • Page 38 CDX-M800 IC401 TDA7416 (MAIN Board (1/2)) 30 29 24 23 HIGH PASS MIXER FILTER2 SOFT STEP FADER ACOUTR SOFT STEP ACINSW FADER ACOUTSW HIGH PASS MIXER 22 OUTRF FILTER WOOFER SOFT STEP OUTRR FILTER FADER 7 BAND EQUALIXER 20 AC2INR HIGH 19 AC2OUTR PASS...

  • Page 39: Exploded Views

    CDX-M800 SECTION 5 EXPLODED VIEWS NOTE: • The mechanical parts with no reference The components identified by • Color Indication of Appearance Parts mark 0 or dotted line with mark number in the exploded views are not supplied. Example : 0 are critical for safety.

  • Page 40: Cam Section

    CDX-M800 5-2. CAM SECTION M601 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-230-495-01 CAM (L) 3-230-494-01 GEAR (C) X-3380-549-1 ARM (B-R) ASSY 3-230-496-01 CAM (R) X-3380-544-2 BRACKET (L) ASSY X-3380-545-2 BRACKET (R) ASSY X-3380-548-1 ARM (B-L) ASSY 3-030-909-11 DAMPER, OIL X-3382-822-1 ARM (A-L) ASSY X-3382-823-1 ARM (A-R) ASSY...

  • Page 41: Main Board Section

    CDX-M800 5-3. MAIN BOARD SECTION supplied not supplied TUX501 F901 not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-230-493-01 GEAR (DRIVE SHAFT) 1-777-246-41 CORD (WITH CONNECTOR) (ANTENNA) 3-230-444-01 GUIDE (DRIVE SHAFT) 1-790-375-22 CORD (WITH CONNECTOR) (SUB OUT (MONO)) 3-040-692-01 RING, CE TYPE RETAINING F901 1-532-877-11 FUSE (BLADE TYPE) (AUTO FUSE) 10A...

  • Page 42: Front Panel Section

    CDX-M800 5-4. FRONT PANEL SECTION not supplied FL900 LCD2 not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-3382-818-1 PANEL (KEY) ASSY, FRONT (US,CND) 3-248-791-01 BUTTON (OPEN) X-3382-824-1 PANEL (KEY) ASSY, FRONT (AEP,UK,E) 3-248-789-01 BUTTON (RESET-DSPL) 3-238-816-01 BUTTON (EJECT) 2-626-869-01 SCREW (M2X3), SERRATION (US,CND) 3-238-820-01 BUTTON (ENTER) (US,CND)

  • Page 43: Cd Mechanism Section (1)

    CDX-M800 5-5. CD MECHANISM SECTION (1) (MG-393XC-121//K) M903 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-683-283-11 IN SELF SW BOARD 3-221-779-02 BRACKET (MOTOR) 3-040-039-03 CHASSIS (T) 3-040-034-01 SPRING (RA), TENSION 3-040-038-01 SPRING (LR), TENSION 3-040-042-01 WASHER 3-040-050-01 LEVER (L) 3-043-880-01 RING (RA), RETAINING 3-040-022-01 RETAINER (ROLLER), SHAFT...

  • Page 44: Cd Mechanism Section (2)

    CDX-M800 5-6. CD MECHANISM SECTION (2) (MG-393XC-121//K) not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-040-025-02 ARM, CHUCKING 3-040-033-01 SPRING (KF1), TENSION 3-040-031-01 DAMPER (T) A-3307-422-A CHASSIS (M) COMPLETE ASSY 3-040-056-01 LEVER (D) 3-040-059-01 SPRING (TR), TENSION 3-040-024-01 RETAINER (DISC) 3-040-057-01 LEVER (LOCK) 3-040-054-01 WHEEL (LW), WORM...

  • Page 45: Cd Mechanism Section (3)

    CDX-M800 5-7. CD MECHANISM SECTION (3) (MG-393XC-121//K) M901 M902 The components identified by Les composants identifiés par une mark 0 or dotted line with mark marque 0 sont critiques pour 0 are critical for safety. la sécurité. Replace only with part number Ne les remplacer que par une piéce specified.

  • Page 46: Electrical Parts List

    CDX-M800 SECTION 6 DISPLAY ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in • Items marked “*” are not stocked since The components identified by mark 0 or dotted line with mark the parts list may be different from the they are seldom required for routine service.
  • Page 47 CDX-M800 DISPLAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark LED903 8-719-053-09 LED SML-310VT-T86 (CLOSE) R944 1-216-845-11 METAL CHIP 100K 1/10W LED905 8-719-053-09 LED SML-310VT-T86 (SCRL) R945 1-216-048-11 METAL CHIP 1/10W LED906 8-719-053-09 LED SML-310VT-T86 (DSPL) R946 1-216-035-11 METAL CHIP 1/10W...
  • Page 48 CDX-M800 DISPLAY IN SELF SW LOAD SW MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark S918 1-771-884-31 SWITCH, TACTILE (WITH LED) C301 1-128-057-11 ELECT 330uF 6.3V (SEEK/AMS . m) C302 1-162-964-11 CERAMIC CHIP 0.001uF S919 1-771-884-31 SWITCH, TACTILE (WITH LED) (DSO) C303 1-124-584-00 ELECT...
  • Page 49 CDX-M800 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C505 1-162-964-11 CERAMIC CHIP 0.001uF D113 6-500-508-01 DIODE RR263M-400FTR (AEP,UK,E) D114 6-500-508-01 DIODE RR263M-400FTR C506 1-162-964-11 CERAMIC CHIP 0.001uF D115 6-500-508-01 DIODE RR263M-400FTR (AEP,UK,E) D116 6-500-508-01 DIODE RR263M-400FTR C520 1-162-964-11 CERAMIC CHIP 0.001uF...
  • Page 50 CDX-M800 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < JUMPER RESISTOR > R174 1-216-809-11 METAL CHIP 1/10W R175 1-216-841-11 METAL CHIP 1/10W JR300 1-216-864-11 METAL CHIP 1/10W R182 1-216-864-11 METAL CHIP 1/10W JR301 1-216-864-11 METAL CHIP 1/10W R184 1-216-809-11 METAL CHIP...
  • Page 51 CDX-M800 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R350 1-216-809-11 METAL CHIP 1/10W R519 1-216-817-11 METAL CHIP 1/10W R351 1-216-809-11 METAL CHIP 1/10W (AEP,UK,E) R356 1-218-871-11 METAL CHIP 0.5% 1/10W R520 1-216-832-11 METAL CHIP 8.2K 1/10W R357...
  • Page 52 CDX-M800 SERVO SL SW Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-3283-233-A SERVO BOARD, COMPLETE < RESISTOR > ********************** 1-216-797-11 METAL CHIP 1/10W 1-683-284-11 FLEXIBLE BOARD 1-218-344-11 METAL CHIP 7.5K 1/10W 1-216-839-11 METAL CHIP 1/10W <...
  • Page 53 CDX-M800 SWITCH Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < JUMPER RESISTOR > ACCESSORIES ************ JR552 1-216-864-11 METAL CHIP 1/10W 1-476-546-12 REMOTE COMMANDER (RM-X111) (AEP,UK,E) < TRANSISTOR > 1-476-546-22 REMOTE COMMANDER (RM-X110) (US,CND) 3-230-549-01 LID, BATTERY CASE (for RM-X110/X111) Q503 8-729-216-22 TRANSISTOR 2SA1162-G 3-251-123-11 MANUAL, INSTRUCTION (ENGLISH,FRENCH,...
  • Page 54 CDX-M800 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2003. 01 Get user manuals: See SafeManuals.com...

Table of Contents