Baumatic BDW2W Installation And Maintenance Instructions Manual page 39

THEN, CONNECT THE DRAIN HOSE
BELOW):
The c urved e nd of the dr a inag e hos e sho uld be hooked i nto the dr ainag e stand pip e or , alternativ ely , over th e
edge of your sink.
During installation, make sure that:
x The dr ainage hose is no t kinked or crushed.
x The hose end , relative to the top surface of th e dish washer (SEE FIG URE BELOW), must be placed
at a height between 32cm and 8 0 c m.
x The end of the hose must nev
x The dr ainag e hose m ust not be extend ed to mo re that a maxi m um le ngth of 1 met re.
exte nsion must have the sam e internal diameter . Fur ther more, the max imum heigh t at whi c h the
hose end can be placed (in the case of an ex
x The dr ainage stand pipe must ha
N :
OTE DO NOT EXTEND THE DRAIN HOSE AS THIS CAN AFFECT THE PERFORMANCE OF
.
THE DISHWASHER
er be i m mersed i n water .
tended tube) must be reduced from 8 0 c m to 5 0 c m.
ve an in ternal diameter of no l ess than 4 cm.
28
(SEE FIGURE
The