INSTALLING THE SSD ANVIL
The SSD Anvil Kit consists of the following items pictured below:
1 SSD Anvil
1 SSD Anvil Shaft
1 Wedge Lock Washer
1 Steel Press Plate
1 Wear Plate
Wedge Lock Washer
1. Place the hex socket of the threaded anvil shaft into the anvil and thread in completely by hand.
2. Place the wedge lock washer onto the anvil shaft.
3. Place the SSD anvil onto the wear plate to protect hands from the sharp tines of the anvil.
(Gloves should also be worn for protection.)
POP-0112 – Rev. 0
16
PRODUCT OPERATION & MAINTENANCE PROCEDURE
SSD Anvil Shaft
SSD Anvil
Steel Press Plate
Model 0101
Wear Plate