Configuration Parameter; Setting Parameter; Setting Group; Ied Parameter Import And Export - ABB REF615R Engineering Manual

1MRS240044-IB A
5.2.1
5.2.2
5.2.3
5.2.4
REF615R
Engineering Manual
• Configuration parameters
• Setting parameters

Configuration parameter

Configuration parameter specifies the operation mode of an application function or of
the IED. These are basic configurations that are normally configured only once and
then not modified again. The IED configures itself during startup according to the
given configuration parameter values.

Setting parameter

Setting parameter (short form: "setting") is a parameter that can be changed in the IED
at runtime.

Setting group

Nearly all settings used by the IED for protection application functions are organized
into a group of settings. Up to six setting groups can be configured with different values.
The IED supports the selection of a setting group at runtime.

IED parameter import and export

IED parameters can be imported and exported in XRIO file format. The parameter import/
export functionality is available via the File menu when the Parameter Setting tool is
open.
GUID-4A63FE0D-7846-4387-A5D3-BD7B4F519A76 V1 EN
Figure 42: Parameter import/export
Protection and control engineering
Section 5
71