Table of Contents
Advertisement
Opera�on Manual
Chap.10
This printer has "Sound Guidanvce func�on" and Messgge on Display func�on"
Regarding sound volume adjustment, follow the step (5) in Ch.9 Printer Driver Specifica�on.
See the list of "Sound Guidance" and "Message on Display" . And follow "Counter measure" when problem happened.
Sound Guidance
Power switch turned on.
Ready to print.
Now prin�ng.
Finished prin�ng.
Paper empty.
Set paper and press
the opera�on bu�on.
Paper has not reached the
transport section. Long press
the operation button, Paper will
be forced out to the output tray.
Paper is not properly transportaed.
Long Press the operation button,
Paper will be forced out to output
tray.
Papers overlapping.
Long Press the operation button,
Paper will be forced out to
the output tray.
Paper jammed.
Long Press the operation button
, Paper will be forced out to
the output tray.
Paper Force to output
tray has started.
Paper Force to output
tray has completed
Paper remains in the
transport sec�on.
Turn off the power and
remove the paper in the
input and output tray.
Voice Guidance and Message on display
Message on display
Status
Turning on
Ready for prin�ng
Prin�ng
Prin�ng is finished
Paper is not set
Paper jam
Paper was fed
as the paper is �lt
Double feeded
Paper jam
Eject paper
forcibly
Finish paper ejec�on
Paper jam
(b) If you s�ll cannot pull out, call
Counter measure
Set dedicated paper
in the paper feeder.
Push opera�on bu�on for
a while and start ejec�on.
Push opera�on bu�on for
a while and start ejec�on.
Push opera�on bu�on for
a while and start ejec�on.
Push opera�on bu�on for
a while and start ejec�on.
If paper is not ejected a�er
pushing bu�on, follow below step.
(a) If you can grab paper from
ejec�on side, pull it out slowly
not to tear.
the service center.
Advertisement
Table of Contents
