Table of Contents
Advertisement
Opera�on Manual
●Select Wi-Fi (Using DHCP<Dynamic Host Configuraton Protocol>)
(4) When using sta�c IP address, follow the step (8).
Select SSID of Wi-Fi rooter which you want to use.
*SSID is wri�en on rooter itself or manual of rooter.
or contact network administrator.
(6)A�er few seconds, the answer will be returned
that connec�on was successful or not.
if it failed, check the security key and try again.
if it s�ll fail, contact to network administrator.
●Select Wi-Fi (Using sta�c IP address)
A�er few seconds, the answer will be returned
that connec�on was successful or not.
if failed, check the security key you typed,
and try again.
If s�ll failed, contact network administrator.
Then follow the step " ③ Add Wi-Fi mode" .
select
Chap.5
How to connect with Wired LAN/Wi-Fi
which is written on rooter or manual,
(5) put "Security Key"
or ask network administrator.
The way to get IP address is to select "Use DHCP" .
A�er choosing, click "8.Connec�on(Printer IP se�ng)" .
select
(7)If it successed, the value of printer when se�ng
the driver will be displayed in the field of
"sta�s�c IP address" . Port name will be set
automa�cally.when you want to change IP address
you can also use this field.
* If you want to add PC connec�ng with printer,
follow the step "D. Add second Printer" .
type
type
click
type
type
click
Advertisement
Table of Contents
