Table of Contents
Advertisement
Opera�on Manual
Chap.9 Printer driver Specifica�on
When you would like to open printer driver Properties, in the software which you use,
select "Print menu" and then "EasyTactix" as printer from the menu.
And After clicking the "Preferences..." , you can find properties.
*To open screen below from start menu, follow the step "How to open properties" .
(1) Click "Preferences...
You can choose orienta�on and print order.
*Using "Other Temperature setting" ,
you can change temperature.
However, it is not normally used.
(2) The screen when you click "Advanced..."
① You can choose "copy count" .
*If you already chosed copy count in software,
you do not need to choose here.
② Using "Voice Guidance" , you can choose volume
OFF(silent)/Small/middle/ Big.
*Regarding how to set up, follow the step P〇.
③ Using "Document Option" ,you can choose
print mode from "Braille /Braille・Graphic /Other"
Braille ... For print data composed of only braille.
Braille・Graphic ... For print data conposed of
Other ... not used at the moment.
④ Print speed can be changed from 0(slow)~6 (fast).
When lowered speed, foaming will be higher,
When higher speed, foaming will be lower.
Recommended speed is 3(standard).
Braille and Graphic.
Advertisement
Table of Contents
