Connecting The Heat Roller Unit To The Printer - Kanematsu Corporation TEAMNisca PR5302 User Manual

3. Open the accessory box and verify the following items are included:
User's Guide
Power Supply Cord
Laminate Ribbon Supply Roll
Laminate Ribbon Take-Up Spool
If any items are missing, please contact your authorized reseller.
4. Remove all packing tape.
5. Remove all packing material from the heat lamp unit.
Note Keep all packing material in case you need to move or re-ship the Heat Roller
Unit
.

Connecting the Heat Roller Unit to the Printer

Caution IMPORTANT! To prevent errors and jams, make certain that the printer and
Heat Roller Unit are on a flat, stable surface. Be sure the printer and the
computer are turned OFF.
To connect the Heat Roller Unit to the printer, refer to the following steps:
8