Searching By Alphabetical Order - Alphabet Search; Searching A Track By Listening To Track Passages - Zappin; In The Case Of "Sensme™ Channels" Playback - Sony DSX-S310BTX Operating Instructions Manual

3
Press the multi-way encoder.
The display returns to the Quick-BrowZer
mode and the selected item appears.
4
Push the multi-way encoder up/down
to select the desired item, then press
it.
Playback starts if the selected item is a track.
To cancel Jump mode
Press (BACK) or push the multi-way encoder
left. A list of the search categories appears.
Searching by alphabetical order
— Alphabet search
When an iPod or USB device containing song
information is connected to the unit, you can
search for a desired item by alphabetical order.
While this unit is reading song information, "
appears on the display. You can use the Alphabet
search function when "
USB device, the maximum number of searchable
files (tracks) is 5,000.
1
Push the multi-way encoder right in
Quick-BrowZer mode.
An alphabet list appears.
2
Rotate the multi-way encoder to select
the first letter of the desired item, then
press it.
A list of items in the selected category
appears in alphabetical order.
If there is no song beginning with the desired
letter, "Not Found" appears.
3
Push the multi-way encoder up/down
to select the desired item, then press
it.
Playback starts if the selected item is a track.
To cancel Alphabet search
Press (BACK) or push the multi-way encoder
left. A list of the search categories appears.
Notes
• For a USB device, it may take time to read song
information after connecting to the unit.
While reading song information, "
top left of the display.
• Only the song information of the USB device last
connected can be stored.
• If replacing the car battery, changing connections or
resetting the unit, the stored song information will be
erased.
"
" disappears. For a
" appears in the
Searching a track by listening
to track passages — ZAPPIN™
While playing back short track passages in a
USB device in sequence, you can search for a
track you want to listen to.
ZAPPIN mode is suitable for searching for a
track in shuffle or shuffle repeat mode.
1
Press (ZAP/SHUF) during playback.
After "ZAPPIN" appears in the display,
playback starts from a passage of the next
track.
The passage is played for the set time, then a
click sounds and the next passage starts.
Track
(ZAP/SHUF) The part of each track to
pressed. playback in ZAPPIN mode.
2
Press the multi-way encoder or
(ZAP/SHUF) when a track you want to
listen is played back.
The track that you select returns to normal
play mode from the beginning.
To search a track by ZAPPIN mode again,
repeat steps 1 and 2.
In the case of "SensMe™
channels" playback
If the track being searched is transferred by
"Content Transfer," the most melodic or
rhythmical sections* of tracks are played. For
details on the SensMe™ function, see page 22.
* May not be detected correctly.
Tips
• You can select the playback time from about 6
seconds/15 seconds/30 seconds (page 43). You
cannot select the passage of the track to playback.
• Push the multi-way encoder left/right in ZAPPIN
mode to skip a track.
• Push the multi-way encoder up/down in ZAPPIN
mode to skip album.
31