Station List; Bookmarking; Sound Settings And Setup Menu; Changing The Sound Settings - Sony DSX-S310BTX Operating Instructions Manual

Note
Under certain circumstances, "Thumbs" feedback may
be unavailable, and "Cannot Thumbs Up/Down" will be
displayed.

Station list

The station list allows you to easily select a
desired station.
1
During playback, press
Pandora stations on your list appear.
2
Push the multi-way encoder right to
select the sorting order: "Date" or "A-
Z."
"Date" sorts stations by the date they were
added to the account, and "A-Z" sorts station
names in alphabetical order.
3
Rotate the multi-way encoder to select
the desired station, then press it.
Playback starts.
A Current sort order
B Current station
C Shared Icon
QuickMix
QuickMix allows you to listen to songs played on
one or more Pandora stations in your station list
randomly.
Edit your QuickMix station selections on the
device before connection.

Bookmarking

The song or artist currently being played can be
bookmarked and stored in your Pandora account.
1
During playback, press and hold
(MODE) until "Bookmark" appears.
2
Rotate the multi-way encoder to select
"Song" or "Artist", then press it.
The bookmark is stored, and the system
returns to the previous display.
Note
Under certain circumstances, bookmark store may fail,
and "Bookmark Error" will be displayed. In this case,
try to bookmark again later.

Sound Settings and Setup Menu

Changing the sound settings

Adjusting the sound
characteristics
1
During reception/playback, press the
(BROWSE).
multi-way encoder.
2
Rotate the multi-way encoder until the
desired menu item appears, then
press it.
3
Use the multi-way encoder to select
the setting, then press it.
4
Press
The setting is complete and the display
returns to normal reception/play mode.
The following items can be set:
The operation of the multi-way encoder will
differ depending on the items.
EQ7 Preset (page 40)
EQ7 Parametric Tune (page 40)
Listening Position Front/Rear (page 41)
Listening Position Subwoofer (page 41)
Listening Position Custom Tune (page 41)
Fader & Balance
Front/Rear/Center (
Adjusts the relative level.
Right/Left/Center (
Adjusts the sound balance.
Subwoofer Tune & LPF
Phase (
Selects the phase: "Normal," "Reverse."
FREQ (
Selects the subwoofer cut-off frequency:
"50Hz," "60Hz," "80Hz," "100Hz," "120Hz."
Slope (
Selects the LPF slope: "1," "2," "3."
Subwoofer Level (
Adjusts the subwoofer volume: "+10 dB" –
"0 dB" – "–10 dB."
("– ∞" is displayed at the lowest setting.)
(BACK).
: Push the multi-way encoder up/down
: Push the multi-way encoder left/right
: Rotate the multi-way encoder
)
)
)
)
)
)
continue to next page t
39