Searching for a track by
listening to track passages
— ZAPPIN™
While playing short track passages from a disc or
USB device in sequence, you can search for a
track you want to listen to.
This function is convenient, for example, when
searching for a track in shuffle or shuffle repeat
mode.
1
During audio playback, touch “ZAP.”
Playback starts from a passage of the next
track.
The passage is played for the set time, and a
beep sounds before the next passage starts.
“ZAP”
The playback section of each
touched.
track in ZAPPIN mode.
2
Touch “ZAP” when a track you want to
listen to is played.
The track that you select returns to normal
play mode from the beginning.
To search for a track via ZAPPIN mode
again, repeat steps 1 and 2.
In the case of “SensMe™ channels”
or “SensMe™ mood” playback
If you enter ZAPPIN mode during “SensMe™
channels” or “SensMe™ mood” playback, the
most melodic or rhythmical sections* of tracks
are played. For details on the SensMe™
function, see “Enjoying music according to your
mood — SensMe™” on page 29.
* May not be detected correctly.
Tips
• You can change the playback time (page 59), but
cannot select the track passage to play.
• You can deactivate the beep sound between track
passages (page 59).
Page 35