Advertisement
Drogue Settings
Click on Change link next to Drogue settings to change
0.1-9.0 secs by 0.1 secs, 3.0 – 9.0 secs by 1.0 secs
Drogue mode (igniter/servo)
Drogue on-time or servo direction/skew
Main Settings
Click on Change link next to Main settings to change
OFF, Nose-Over, 100'-500' by 50', 500'-2,000' by 100'
Main Mode (igniter/servo)
Main on-time or servo direction/skew
FailSafe:
Velocity: OFF, 50-200 ft/sec by 25 ft/sec
Time: 50-3000 ms by 25 ms
Global Settings
Click on the Settings link on the Status Page to change:
LDA – Launch Detect Altitude
Launch samples/sec
Descent Samples/sec
Arming
Select the proper flight settings
Set your rocket horizontally and calibrate the accelerometer
Check it in with the RSO/LCO and rack your rocket
Raise your rocket on the rail and check status for all AQUA
Enter the 4-digit validation code, then click ARM
When the "Armed" page displays, CLOSE YOUR BROWSER
Disarming (for aborted flight)
Connect to the Status page (192.168.4.1)
Enter the 4-digit validation code, then click DISARM
Wait for the normal Status Page... if it takes more than 10 seconds, refresh your browser
Downloading Flight Status Data
Click on the Flights link on the Status Page
Click on the 'More' link next to the flight
View the Flight Summary data...
For detail .csv download, click on the 'Detail' link at the bottom of the Flight Summary
page
- 59 -
Advertisement
