Advertisement
Eggtimer Proton Features
WiFi-Enabled, SIX-Output logging flight computer with 120G Accelerometer
Flexible deployment and arming modes, to handle virtually any flight scenario
Any channel can perform any function... no dedicated "Drogue" or "Main" channels
First three channels can be set for standard servos during deployments, variable servo travel
Programming, arming, and downloading can all be done with any WiFi/browser-enabled device
No apps required on your device, just a browser
Size: 3.25" x 1.3", fits easily in a 38mm coupler tube, weighs about 20 grams
Altimeter records data up to 60,000'
Detailed flight data for 14 flights is saved, and can be downloaded using your browser
Summary data can be downloaded or viewed on your browser, immediately after the flight
Fully "mach immune", deployments are inhibited until the rocket is moving slowly near apogee
Battery input is fully polarity protected
Works with a 2S/7.4V LiPo battery, 300 mAH or more recommended
Optional separate battery input for deployment channels protects against "brownouts"
Works with almost all common deployment devices, will even light an Estes® igniter with a 2S LiPo
Each output channel can handle up to 10A/40V, system capacity 30A
Test mode so you can do an actual pyro test remotely up to 200' away from your rocket
Dual-ended deployment outputs, igniters are essentially "dead" until well into the flight
No switch needed, since it's disarmed and the igniters are dead until YOU arm it
"Fail-Safe" mode can fire main chute (in deployment mode) if a drogue failure is detected, preventing a
potential high-speed chute deployment or crash
- 2 -
Advertisement
