Installation Foundation - Midea Aqua Tempto Power Series Manual

MCAC-ATSM-2014-09 Aqua tempo power series tropical air-cooled scroll chiller 50Hz
and D, and B and C, the spaces between the unit and the obstacle are given in the figure above, the space
between adjacent modular units in the direction A and D should not be less than 300mm, and the space
between adjacent modular units in the direction B and C should not be less than 600mm.
If the spaces mentioned above cannot be met, the air passing from the unit to the coils may be restricted, or
back flow of air discharge may occur, and the performance of the unit may be affected, or the unit may fail to
operate.

1.3 Installation foundation

The unit should be located on the horizontal foundation, the ground floor or the roof which can bear operating
weight of the unit and the weight of maintenance personnel. Refer to the operating weight parameters in
specification table.
If the unit is located so high that it is inconvenient for maintenance personnel to conduct maintenance, the
suitable scaffold can be provided around the unit.
The scaffold must be able to bear the weight of maintenance personnel and maintenance facilities.
The bottom frame of the unit is not allowed to be embedded into the concrete of installation foundation.
Location drawing of installation foundation of the unit (unit: mm)
MGBT- F25W/RN1, MGBT-D25W/RN1, MGBT-D30W/RN1, MGBT-F30W/RN1
MGBT- F(D)60W/RN1
163