Error Message - FUTABA T18SZ Manual

Message No items were selected in the "Convert from" group. Please select an item on the model list.
Explanation The model name of conversion data is the same as an existing model name.
Model data cannot be displayed on a list of "Convert from" block. Please set "Location" of
the "Convert from" block to the location where the source conversion data is saved.
What to do
location is correct, the items are displayed on the respective list and it will be possible
to select amongst these items.
Message There is "file path" file. Please change the Model Name.
There is already the model data of the same name. As such, you must rename the data
Explanation
accordingly.
Please input a unique name into the "Model name" text box of the "Convert to" group box.
What to do
You can confirm the name of other model data from the list of the "Convert to" group box.
The "Transmitter" type of the "Convert from" group is not correct. Please check the
Message
"Transmitter" type and the items on the model list in the "Convert from" group.
The transmitter type information of the source code information is different from the
Explanation
transmitter type chosen in "Transmitter" of the "Convert from" group box.
What to do Confirm that the model data are for T18MZ.
Message Could not open the "file path" file. Please check the Location in the "Convert from" group.
After the setting of origin of conversion data, it appears that a file was erased, or that the
Explanation
memory card was removed prematurely.
What to do
Select the source conversion data once again.
Could not open the "file path" file. Please check the Model Name and the Location in the
Message
"Convert to" group.
After the selecting the source data, it appears that a folder set in the "Location" of the
Explanation
"Convert to" group box was erased, or that a memory card was removed prematurely.
What to do
Choose the location of conversion data once again
T18SZ Model Data Converter

7. Error Message

11
If the