Table of Contents
Advertisement
User's Manual
7)
8)
Page 16 of 35
A:
Orientation of the K&F VariQ unit for
line source operation:
•
Horizontal beamwidth: 30°
Vertical beamwidth: 60°
(required for array operation)
When replacing the K&F VariQ unit,
make sure it is not jammed.
Re-insert the unit into the chassis slowly
and carefully.
Check the K&F VariQ unit is positioned
in the enclosure as intended in your
configuration by looking through the
opening in the enclosure.
Compare the color you see through the
opening in the enclosure with the color
list in the chapter 'Line Source, Point
Source' starting on page 13 in this
manual.
Version 1.5
B:
Orientation of the K&F VariQ unit for point
source operation:
•
Horizontal beamwidth: 60°
Vertical beamwidth:30° asymmetrical
-10° pre-tilt
•
or:
Horizontal beamwidth: 60°
Vertical beamwidth:30° asymmetrical
10° pre-tilt
© KLING & FREITAG GMBH
K&F SPECTRA 212
Advertisement
Table of Contents
