Table of Contents
Advertisement
User's Manual
3)
4)
5)
6)
© KLING & FREITAG GMBH
Remove the grille.
On both sides of the speaker, unscrew
and remove the screw holding the K&F
VariQ unit.
If you have to lay down the K&F VariQ
unit during the speaker conversion,
turn it 180° downwards and place it ex-
clusively on its front side, i.e. on its
waveformer.
Take the waveformer of the K&F VariQ
unit with both hands and slowly and
carefully pull the unit vertically from
the chassis.
Note that the connecting cable to the
K&F VariQ unit may get disconnected
when removing the unit from the chas-
sis.
In this case, be sure to reconnect the ca-
ble.
Rotate the K&F VariQ unit as required:
Version 1.5
K&F SPECTRA 212
Page 15 of 35
Advertisement
Table of Contents
