European Community, Switzerland, Norway, Iceland And Liechtenstein - NAO EVOLUTION Safety Manual

EUROPEAN COMMUNITY,
SWITZERLAND, NORWAY, ICELAND
AND LIECHTENSTEIN
NAO is in compliance with the essential requirement and CE
and other relevant provisions of Directive R&TTE 1995/5/EC
and ErP 2009/125/CE.
USA
This equipment complies with the requirements of FCC part 15.
Contains FCC ID NKR-DNUA134
FCC REQUIREMENTS for NAO
Federal Communication Commission Interference Statement 47 CFR
Section 15.105(a)
NOTE: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required
to correct the interference at their own expense.
NO UNAUTHORIZED MODIFICATIONS
47 CFR Section 15.21
CAUTION: This equipment may not be modified, altered,
or changed in any way without signed written permission
from SOFTBANK ROBOTICS.
8
Unauthorized modification may void the equipment authorization
from the FCC and will void the SOFTBANK ROBOTICS warranty.
ANTENNA REQUIREMENT
47 CFR Section 15.203
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
To comply with FCC and Industry Canada RF radiation exposure
requirements, the antenna(s) used for this transmitter module
must not be co-located or operating in conjunction with any other
antenna or transmitter.
COMPLIANCE INFORMATION AND
SYMBOLS
California: Complies with CEC (California Energy
Commission) for battery charger
US and Canada NRTL TUV Mark : Complies with
ANSI/UL rules for the US and Canada
China: Do not use at altitudes above 2000m
China: Do not use in tropical climate regions
Japan: Telecom and radio equipment certified for
use in Japan (MIC and JATE certification)
Japan : Complies with PSE certification and
Denan Law
Europe : Complies with CE directives and
regulations 2014/53/UE (R&TTE) and 2011/65/
UE (RohS2)
Europe : Waste Electrical and Electronic
Equipment Directive is the European Community
directive 2002/96/EC
Australia (RCM ): complies with electrical safety,
electromagnetic compatilibity, electromagnetic
energy & telecommunications requirements
Class II equipment: Complies with IEC 60 950-1
having double insulation
Health: IEC/EN 62479
Wireless Radio Equipment: ETSI EN 300 328, ETSI
EN 301 893
ETSI EN 301 489-1, ETSI EN 301 489-17
FCC Part 15, ARIB-STD-T66 & ARIB-STD-T71
EMC: EN 55022, CISPR22, EN 55024, CISPR24
Lithium-Ion batteries are recyclable
Indoor use only
Caution: Read the Safety Guide before using
this device
This is a class A product