Poe Switches - HP ProCurve 3500 Installation And Getting Started Manual

Introducing the Switch

PoE Switches

ProCurve Switch Mdl EPS RPS *
Status of the Back Spd mode:
3500yl-24G
J8692A
PoE
Act
Status
PoE FDx
Power
LED
Mode
*
Tmp Spd
Fan PoE
Fault
Test Usr
Locator
Console Auxiliary Port
Reset Clear
*
Status of the Back Spd mode:
ProCurve Switch Mdl EPS RPS
3500yl-48G 3 5 7
Link 1 Mode
J8692A
PoE
Act
Status
PoE FDx
Power
LED
Mode
*
Tmp Spd
Fault Fan PoE
Test Usr
Locator
2 4 6 8
Link Mode
Reset Clear
The 3500-24 and 3500-24-PoE switches have 20 auto-sensing 10/100Base-TX
RJ-45 ports and 4 dual-personality ports—either auto-sensing 10/100/1000-T
or SFP transceiver.
The 3500-48 and 3500-48-PoE switches have 44 auto-sensing 10/100Base-TX
RJ-45 ports and 4 dual-personality ports—either auto-sensing 10/100/1000-T
or SFP transceiver.
In each of the 3500yl-24G-PWR and 3500yl-48G-PWR switches, one slot is
provided in the back of the device to support a four port (two fixed CX4 ports
and two X2 transceiver ports) 10 Gigabit per second Ethernet (10-GbE)
module.
1-2
PoE-Integrated 10/100/1000Base-T Ports (1 - 24T) — Ports are IEEE Auto MDI/MDI-X
off = 10 Mbps
1 3 5 7 9 11
Link Mode
flash = 100 Mbps
on = 1000 Mbps
2 4 6 8 10 12
Link Mode
off = 10 Mbps, flash = 100 Mbps, on = 1000 Mbps PoE-Integrated 10/100/1000Base-T Ports (1 - 48T) — Ports are IEEE Auto MDI/MDI-X
9 11 Link 13 Mode 15 17 19 21
10 12 14 16 18 20 22
Link Mode
HP ProCurve 3500-24-PoE Switch (J9471A)
HP ProCurve 3500-48-PoE Switch (J9473A)
HP ProCurve 3500yl-24G-PWR Switch (J8692A)
Dual-Personality Ports: 10/100/1000-T (T) or Mini-GBIC (M)
13 15 17 19 21 23 21
Link Mode T T Link M
14 16 18 20 22 24 22
Link Mode T T Link M
HP ProCurve 3500yl-48G-PWR Switch (J8693A)
23 Link 25 Mode 27 29 31 33 35 Link
24 26 28 30 32 34 36
Link Mode Link
23
Mode M
24
Mode M
Dual-Personality Ports: 10/100/1000-T (T) or Mini-GBIC (M)
37 Mode 39 41 43 45 47 Link 45 Mode 47
T T M M
38 40 42 44 46 48 46 48
Mode T T Link M Mode M