HP ProCurve 3500 Installation And Getting Started Manual page 14

Introducing the Switch
Speed Technology
100-Mbps 100-FX
1000-T
1000-SX
1000-LX
1-Gbps
1000-LH
1000-BX
CX4
10-Gig
Direct Attach
3 10-Gig SR
10-Gbps
10-Gig LRM
10-Gig LR
10-Gig ER
1
For supported transceivers see www.hp.com/go/procurve/faqs. Both ProCurve 10-GbE, SFP/SFP+ transceivers and
ProCurve Mini-GBICs have links to a list of supported products (first question in the "General Product Information"
category).
2
The 1000Base-T mini-GBIC is supported on the 6200yl only.
3
The 10-Gbps transceivers are supported on the 3500yl and 6200yl switches only. They are not supported on the
3500 switches.
For technical details of cabling and technologies see Appendix C,
The 3500yl, 3500-24-PoE and 3500-48-PoE switches are designed to support
Power over Ethernet (PoE) technology. The switches support 802.3af
standard devices and some pre-standard PoE devices. The 3500yl-24G-PoE+
and 3500-48G-PoE+ switches are designed to support Power over Ethernet
plus (PoE+) technology. The switches support 802.3at standard devices and
some pre-standard PoE devices. For a list of these devices, see the FAQs for
your switch model. This feature is the default and you must disable it if you
do not want to use it. (Refer to the Management and Configuration Guide
which is on the HP ProCurve Web site, www.hp.com/go/procurve/manuals. (See
page 5-1
1-4
1
Cabling
Fiber (multimode)
Copper (twisted-pair)
Fiber (multimode)
Fiber (multimode or single
mode)
Fiber (single mode)
Fiber (single mode)
Copper (twinaxial)
Copper (twinaxial)
Fiber (multimode)
Fiber (multimode)
Fiber (single mode)
Fiber (single mode)
for details.)
Transceiver form-factor
and connector
SFP (mini-GBIC) X2 Connector
Connector
LC
2
RJ-45
LC
LC
LC
LC
CX4
SC
SC
SC
SC
"Cabling and Technology
SFP+
Connector
N/A
LC
LC
LC
Information".