Installation Instructions; Refrigerator - GE G6S28TSLSS Owner's Manual

Installation
Instructions
Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT
—
codes and ordinances. Save these instructions for
local inspector's use.
Be sure to leave these
instructions with the Consumer.
future reference.
basic mechanical skills.
Completion time :
Proper installation is the responsibility of the
installer.
Product failure due to improper installation is not
covered under the Warranty.
WATER PRESSURE
IMPORTANT:
A cold water supply with water
is required to operate the ice maker.
NOTE:
required, ice cubes could be hollow or irregular
shaped.
a licensed, qualified plumber.
Reverse Osmosis Water Supply
connected to your cold water supply, the water
pressure to the reverse osmosis system needs to be
a minimum of 40 to 60 psi (276 to 414 kPa).
Check to see whether the sediment filter in the
reverse osmosis system is blocked. Replace the
filter if necessary.
Allow the storage tank on the reverse osmosis
system to refill after heavy usage.
49-60765
Observe all governing

Refrigerator

G6S28TSLSS Models
REFRIGERATOR LOCATION
often enough to maintain proper temperatures.
perform properly.
to water (rain, etc.) or direct sunlight.
loaded.
CAUTION
LIFTING HAZARD
other injury.
Your refrigerator is heavy. When moving the
refrigerator for cleaning or service, be sure to cover
the floor with cardboard or hardboard to avoid floor
damage. Always pull the refrigerator straight out
when trying to move it, as floor damage could occur.
WATER SUPPLY REQUIREMENTS
IMPORTANT
until water line is connected.
All installations must meet local plumbing code
requirements.
copper tubing only in areas where the household
CLEARANCES
Allow a 2" (50mm) back clearance for ease of
installation, proper air circulation and plumbing and
electrical connections.
15