6 .4 .7
Adjusting the Tension of the Pad Shoe Spring
• Loosen the locking screw (black arrow) with an Allen key.
• Adjust the tension of the spring by turning the adjusting ring (white arrow) clockwise
with a special tool.
$The pad shoe pressure should be (measured on pad shoe with a spring scale):
- 450 g ± 50 g at open condition and
- 150 g to 250 g at closed condition.
• After adjustment lock the spring by tightening the locking screw (black arrow) again.
6 .4 .8
Adjusting the Distance between Pad Shoe and Sprocket
• Turn the adjusting screw (arrow) until
a gap of 2 film layers is generated
between the sprocket and the pad
shoe.
• After adjustment paint-lock the
adjusting screw.
6 .4 .9
Adjusting the IR Reflex Film Break Sensor
Position the sensor (arrow) in a way that it "looks" vertically towards the film surface.
The sensor's view must be perpendicular to the film.
• To adjust the sensitivity of the sensor
thread a film and turn the plastic screw
(arrow) with a screw driver until the red
LED (adjusting aid) blinks.
• Then turn the screw until the LED surely
lights steadily.
Issue: 05/2011
FP 25/30/50 D / FP 10/20/3050 A
57