Protective Devices; Main Switch; Ir Reflex Film Break Sensor; Film Stripper - Kinoton FP 30 D Operating Manual

1 .6

Protective Devices

All existing safety devices must be checked regularly
1 .6 .1

Main Switch

In case of an emergency, you can switch off the projector using the main switch (under
the projector door). Push the switch to position "0". The red lamp in the switch turns off.
1 .6 .2

IR Reflex Film Break Sensor

The film break sensor (arrow) switches off the projector when no film is passing the sen-
sor (e. g. at a film break). In this case the projector will be stopped.
NOTE
X
If your projector is equipped with an automation system the film break sensor can
trigger a run of events.
1 .6 .3

Film Stripper

The film stripper (arrow) prevents film from winding around the sprocket after a film
break or loss of a tape fixing has happened.
Film strippers are attached to all sprockets.
Issue: 05/2011
FP 30 D
7