HANDLEBAR INSTALLATION – DORADO DH right fork leg. Turning the knob clockwise (as you are looking from a The DORADO DH comes equipped with an integrated handlebar rider’s position) increases rebound damping, while turning it coun- upper triple clamp system. This provides additional steering stiffness terclockwise decrease rebound damping.
If you have any questions regarding your 2003 Manitou DORADO suspension fork in the U.S., contact the Answer Customer Service Department at (661) 257-4411. For information outside of the U.S., contact your authorized Manitou dealer or distributor.
Page 5
DEALER SERVICE ADDENDUM Inner Leg Removal (Left Leg, Figure 4) Remove the coil spring (see above) prior to removing the compression INTRODUCTION When servicing the fork, take the time to rod. Unscrew the top cap (1) inspect all parts for excessive wear or damage. There are basically with a 1 1/16"...
Page 6
Damping System (Right Leg) Service – Leg Removal 5. Insert the compression damp- 1 Foam Compensator (Figure 9) ing assembly with its foam It is recommended that the compensator (if applicable) right leg be removed before wrapped tightly around the service.