Different Types Of Ventilation Gaps - Miele KWT 6112 iG ed/cs Operating And Installation Instructions

Installation
Air at the back of the wine conditioning
unit gets warm. The appliance housing
unit must therefore be constructed to
allow sufficient space for ventilation
(see "Building-in dimensions").
– Air intake is provided underneath the
appliance door.
– Air must be allowed to escape
through a ventilation gap provided
above the wine conditioning unit.
This ventilation gap must have a min-
imum cross-section of 200 cm² to
ensure that the warm air can escape
unhindered.
– Important! The appliance uses less
energy, the larger the ventilation
cross-section.
The air inlet and outlet must not be
covered or blocked in any way. They
must also be regularly cleaned of
dust.
56

Different types of ventilation gaps

– A : directly above the wine condition-
ing unit
– B : above a top box
– C : in a top box through a ventilation
grille at the front
If ventilation grilles are to be fitted in
the ventilation gaps, the ventilation
gaps must be larger than 200 cm².
The unobstructed airflow of 200 cm²
is calculated by adding up the total
area of ventilation openings in the
grille.