Miele KWT 6112 iG ed/cs Operating And Installation Instructions page 43

To confirm the filters have been
changed
 Touch the settings sensor.
All symbols available for selection will
appear in the display and the  symbol
flashes.
 Touch the sensors for setting the
temperature ( or ) repeatedly until
the  symbol flashes.
 Touch the OK sensor to confirm your
selection.
The  will flash in the display (means:
Active AirClean filter is fitted in the ap-
pliance), the  symbol lights up.
 Touch the symbols for setting the
temperature ( or ) repeatedly, until
the  symbol is displayed (means: the
counter has been reset).
Active AirClean filters
 Touch the OK sensor to confirm your
selection.
The selected setting is applied, the
 symbol flashes.
 Touch the settings sensor to leave
settings mode.
Otherwise the appliance exits set-
tings mode automatically after ap-
proximately one minute.
The  in the display goes out.
43