Related Products - Viking 40-IP Product Manual

The Viking model 40TB-IP Talk-Back Ceiling/Wall Speaker enables two-way
conversations via SIP and also allows for standard paging and background music
via multicast. The Talk-Back Speaker easily connects with a single CAT5/6 cable
from your PoE switch. Its shallow depth allows the speaker to be conveniently
mounted in a standard 2" x 4" stud wall or ceiling.
An auxiliary switch input allows a hard wired wall button to initiate a SIP call.
Alternately, an optional wireless Bluetooth remote call button can be used (Viking
model BTR-3, sold separately). A momentary button press will initiate a standard
call, and holding the button for 3 or more seconds will initiate an emergency call.
The remote can also be used to adjust the speaker volume. The LED on the 40TB-IP
can be programmed to blink when there is call activity.
The integrated microphone enables talk-back and also monitors room noise to
automatically increase speaker volume when necessary. Line-level audio output
connections are provided for connecting to an external amplifier. Speaker output
connections are also provided to directly drive additional analog speakers.
A programmable relay output is provided for activating door locks, strobe lights,
external amplifiers, etc. For more info, see DOD 502.
PA-IP
For more info, see DOD 505

Related Products

The Viking model PA-IP SIP / Multicast Paging Adapter provides an interface between new VoIP
phone systems (hardware or hosted/cloud based) and analog paging systems, eliminating the
need for an ATA or FXS port. The PA-IP can be used for standard SIP endpoint paging or multicast
paging and background music.
The unit easily connects with a single CAT5/6 cable from your PoE switch. The night bell feature
is programmable for time of day and day of week to enable loud ringing for after hour incoming
calls. Alternatively the night bell feature can be enabled by a contact closure across the trigger
input terminals. Line-level audio output connections are provided for connecting to an external
amplifier.
A built-in 6 Watt class D amplifier with speaker output connections are also provided to drive up
to 6 analog speakers. A programmable relay output is provided for triggering external amplifiers,
20