Friedrich ZoneAire Compact P08SA Owner's Manual page 8

DISPLAY FUNCTIONS
8. SLEEP CONTROL FUNCTION
In "Sleep" mode, your unit will automatically go into low fan speed allowing the temperature to slowly drift up
(in cooling) or down (in heating). See below:
- While in cooling mode, press the SLEEP key to set the temperature. It increases 2°F after an hour
and at most increases 4°F after 2 hours.
- While in heating mode, press the SLEEP key to set the temperature. It decreases 2°F after hour and
at most decreases 4°F after 2 hours.
- Press the SLEEP key again to cancel the setting.
9. ALARM
When the water tank is full,"E4" will be displayed on the display panel. To resume operation, please remove the
rubber cap of the drain hose to drain out the water firstly. The E4 warning will disappear after draining, and then
you can restart the unit by pressing the POWER key.
8
ZoneAire Compact I & O_98081002_02.indd 8 3/16/2018 11:13:25 AM