Display Functions - Friedrich ZoneAire Compact P08SA Owner's Manual

DISPLAY FUNCTIONS

: LED DISPLAY
: POWER
: MODE
: TIMER
: SLEEP mode
1. FUNCTIONS Key Description:
POWER (On/ Off Key)
- Standby mode (Default)
- Turn On/ Off the unit
- Turn on the unit, the indicator
- Turn of the unit to standby mode, the indicator
2. MODE (Functions switch key)
and back to Cooling again.
COOLING/Heating/ Dehumidification Modes:
The indicator
If the compressor shuts down, the indicator
The display window shows setting temperature on screen.
3. TEMPERATURE REGULATION Knob (UP/Down)
- Rotate the dial
value is 30ºC/86ºF (25ºC/77ºF). Rotate the dial in a counter-clockwise direction to decrease the
value 1ºC/1ºF per scale. The minimum value is 17ºC/63ºF(15ºC/59ºF).
- In DEHUMIDIFYING mode, the dial
4. PROGRAMMABLE TIMER
- Press the key
the timer setting, the indicator light will turn off.
- While the unit is operating or in standby, press the
counter-clockwise direction to set the Auto-Off time from 0 to 24 hours.
- During the TIMER mode, press and hold the key
- To set the time, press the key
during setting and show the time setting on screen.
6
ZoneAire Compact I & O_98081002_02.indd 6
:
lights on.
: the switching cycle is Cooling (Default) > Dehumidifying > Heating,
light turns blue for cooling, red for heating, and green for dehumidification>
in clockwise direction; the value will increase 1ºC/1ºF per scale. The maximum
is inactive.
to activate the timer, the indicator
before rotating the dial
lights off.
blinks.
lights on; press the key
key and rotate the dial
for 1 second, the time increases continuously
. The display will flash the on/ off time
again to cancel
in clockwise/
3/16/2018 11:13:25 AM