Table of Contents
Advertisement
Step 8
XP18
(6)
The studs provide a surface for at-
taching the siding panels.
1
Following dimensions, measuring
from the ends of angles, place a stud
between each corner and splice post
at the rear of building and 2 studs
between corner posts at the sides.
Position stud inside top angle and
fasten with a screw at the lower hole.
2
Rest bottom tab (large hole) out-
side floor frame. Do not fasten tab at
this time. Repeat procedure for the
remaining studs around the building.
● Parts Needed For ●
Studs
18
● ● ● ● ● 9344 Siding Stud (6)
FASTEN STUD AT
LOWER HOLE
9344
DO NOT FASTEN TAB
AT THIS TIME
LARGE HOLE
Advertisement
Table of Contents
