4.5
Setting-up Requirements
4.5.1 Installation Location
The location must be even.
When choosing the installation location the following must be kept in mind: the flow of the cooling air
must not be restricted, forward and back flow connections must be easily accessable and all hoses
must be installed without sharp bends.
4.5.2 Environmental Conditions
CAUTION
Risk of damage through unsuitable environmental conditions!
Damage to the unit and corrosion damage may result and are not covered by manufacturer's
liability.
The unit is only authorized for use in indoor environments.
The unit must not be stored or operated in agressive, humid environments.
The unit must not be stored or operated outdoor.
Pay attention to the environmental conditions as given in the specifications on page 16.
4.5.3 Infrastructure
The following infrastructure is required for connecting the unit:
Parameter
Operating voltage
Table 8:
Required infrastructure
Laird Technologies GmbH
Operation Manual (Translation)
Rated value
230 VAC
Date: 06-Jul-2015
Version: 2.0
Product Description
Setting-up Requirements
Oil-Air Cooling Unit OL 4503
1264.00
17