Table of Contents
Advertisement
Product Description
Intended Use
4 Product Description
4.1
Intended Use
The oil-air cooler OL 4503 is used for the cooling of an oil circuit. Oil circulates between the cooling unit and
the device to be cooled. The oil is recooled by an air-cooled heat exchanger. The maximum cooling capacity
depends on the ambient air temperature (see page 16 ).
The unit is exclusively intended for use in industrial and commercial environments.
The intended use also includes the observance and following of all hints given in this Operation Manual.
4.2
Non-Conformity with the Intended Use
Operation of the unit under improper operational conditions is not permitted, since otherwise the operation
safety can not be granted.
When using the unit in a way not compliant with the intended use, hazardous situations may occur.
Operation of the unit is not permitted under the following conditions:
The unit is used for a purpose other than the one it is intended for.
The unit or parts of it are damaged, the electrical installation is not correct or the insulation is broken.
Protective or safety equipment is not functional or defect, improperly installed or missing.
The unit is not working properly.
The unit was modified without authorization or modified in a way that is not permitted.
Controlling devices were modified in a way that is not permitted.
Operational parameters were changed in a way that is not permitted.
Operation in areas exposed to explosion hazards.
Operation with cooling media not according to specification.
Use of unauthorized tools.
Exceedance of the compulsary maintenance intervals.
PLEASE NOTE
The manufacturer is not liable for damage occuring when using the unit in a way it was not intended.
When using the unit in a way it was not intended for, the manufactorer's waranty given by LAIRD will
expire.
Laird Technologies GmbH
14
Operation Manual (Translation)
Date: 06-Jul-2015
Version: 2.0
Oil-Air Cooling Unit OL 4503
1264.00
Hide quick links:
Advertisement
Table of Contents
