Table of Contents
Advertisement
Risk of damage from incorrect installation.
Incorrect installation can cause damage to the ProLine appliance.
The ProLine appliance must only be installed by a qualified and competent
person in strict accordance with current national and local safety regulations.
Damage from falling objects.
Take care not to damage the ProLine appliance when fitting wall units or a
rangehood above it.
Fit the wall units and the rangehood before the ProLine appliance.
The veneer or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any splashbacks must be of heat-resistant
material.
The Teppanyaki must not be installed directly next to a
salamander (CS 1421). It is essential to maintain a distance of at
least 150 mm between these two appliances.
The ProLine appliance must not be installed over a fridge, fridge-
freezer, freezer, dishwasher, washing machine, washer-dryer or
tumble dryer.
When installing the ProLine appliance, make sure that the mains
connection cable cannot come into contact with hot appliance parts.
After installation, the mains connection cable of the ProLine
appliance must not come into contact with any moving kitchen
component (e.g. a drawer) or be subject to mechanical loads which
could damage it.
Carefully observe the safety clearances listed on the following
pages.
All dimensions in this instruction booklet are given in mm.
Safety instructions for installation
21
Advertisement
Table of Contents
