Table of Contents
Advertisement
Automatically acknowledge an individual call
PORT OPS/VTS
RCV:INDIV
N 39 27.021'
ROUTINE
E135 12.011'
567856789
T 09:34 UTC
ESC->EXIT
Reply to a group call
PORT OPS/VTS
RCV:GROUP
N 39 27.021'
URGENCY
E135 12.011'
RACING
T 09:34 UTC
COMMERCIAL
N 39 27.021'
E135 12.011'
T 09:39 UTC
If you have set up your radio to respond
to incoming DSC calls automatically (see
Reference Section 2 - Select your response to
individual calls) the following happens when the
radio picks up an incoming call:
1. The radio beeps to alert you to the incoming
call. Press any key except >ENT or <ESC to
stop the beeps now.
At the same time, the LCD screen displays
the BUSY symbol, the type of incoming call,
and the MMSID of the caller.
If the radio recognises the MMSID as one of
your buddies, it displays the buddy name in
place of the MMSID.
The radio also changes to CH70 automatically
and displays the TX symbol.
FROM
034567891
ESC->EXIT
When the radio picks up an incoming call from
any one of the groups that you have set up
earlier:
2. Press >ENT or PTT to send an
The details of the incoming call are stored in the
call log. If the call log is full, the oldest entry is
automatically deleted.
You can also store the MMSID of any entry
in your buddy list, if you want. The radio will
automatically copy the MMSID but you must
enter a name manually.
PORT OPS/VTS
N 39 27.021'
E135 12.011'
T 09:39 UTC
1. The radio beeps to alert you to the incoming
If you press <ESC to ignore the call, or do
not respond within three minutes, the radio
returns to its previous status.
acknowledgement on CH70. The radio moves
to the designated working channel ready for
your transmission.
call. The type of beep depends upon the type
of call. Press any key except >ENT or <ESC
to stop the beeps.
51
Advertisement
Table of Contents
