Table of Contents
Advertisement
48
4. The NS100 radio asks for confirmation.
Press >ENT to send the LL position request
to your buddy.
5. The radio checks the status of CH70 and
if it is busy, waits for two seconds before
rechecking. (The radio will repeat this
cycle twice before returning to the normal
working channel mode.)
When CH70 is free, the LL position request
is sent and the TX symbol appears on the
LCD screen.
6. The working channel is displayed while
the radio waits for an acknowledgement
from your buddy. If no acknowledgement is
received within two minutes, the radio asks
if you want to retry. Press >ENT to retry.
If your buddy hasn't acknowledged the LL
position request after three minutes at your
last attempt, the radio returns to normal
working channel mode.
7. If the LL position request is acknowledged,
your buddy's position data and the time are
both displayed on the LCD screen.
Advertisement
Table of Contents
