Enter Your Atis Id; Turn The Atis Functions On/Off - NorthStar NS100 SS Quickstart Manual And Reference Manual

Enter your ATIS ID

LOCAL/DIST DSC SETUP
USA/INT/CAN LL REPLY
GPS/DATA DSC FUNC
>DSC SETUP >ATIS ID
WARNING!
This is a once-only
operation. You can
display and read your
ATIS ID at any time,
but you only get one
opportunity to store it in
the radio. You cannot
change it after you have
stored it.

Turn the ATIS functions on/off

LOCAL/DIST DSC SETUP
USA/INT/CAN DSC FUNC
GPS/DATA ATIS ID
>DSC SETUP >ATIS FUNC
Inland waterways rules
require 1W Tx power on
channels 06, 08, 10, 11,
12, 13, 14, 15, 17, 71,
72, 74, and 77.
INPUT USER 987654321
ATIS ID ATIS ID
9________ ENT>STORE
ESC>CANCEL
If you are navigating inland waterways within
Europe, you must enter your ATIS ID to access
ATIS functionality. ATIS will send a digital signal
anytime you release the PTT key.
1. Select DSC SETUP and press >ENT.
2. Move the cursor to ATIS ID and press >ENT.
If this is the first time that you are entering
your ATIS ID, a dashed line appears with 9
shown as the first number. Note that an ATIS
ID always starts with 9.
3. Enter the rest of your ATIS ID numbers along
the dashed line. The cursor automatically
moves to the next space after you enter each
ATIS FUNC
ENT>ON
ESC>OFF
1. Select DSC SETUP and press >ENT.
2. Move the cursor to ATIS FUNC and press
>ENT.
3. Press >ENT again if you want to turn the ATIS
functions ON and the ATIS symbol will appear
on the LCD screen to confirm that your vessel
has ATIS functionality,
USERATISID 987654321
INPUT AGAIN ATIS ID
_________ ENT>STORE
ESC>CANCEL
number.
If you make an error, press <ESC to clear
all the numbers you have entered so far and
return to the DSC SETUP menu, so that you
can start again.
4. When you have entered your ATIS ID correctly,
press >ENT.
5. You must reenter your ATIS ID again as a
check, then press >ENT again to permanently
store your ATIS ID in the radio.
You can view your ATIS ID any time by selecting
ATIS ID in the DSC SETUP menu.
OR
press <ESC to turn ATIS functionality OFF.
NOTE: It is not possible to have ATIS and DSC
operating simultaneously. When you turn one
ON, the other will turn OFF. If they are both off,
you must turn on DSC to get DSC functionality.
41