Make A Routine Call To A Group - NorthStar NS100 SS Quickstart Manual And Reference Manual

Make a routine call to a group

DSC CALL SELECT GROUP
LAST CALL >FISHING
INDIVIDUAL WATERSKIERS
>GROUP RACING
is to a Coast Station the radio will recognize
this and select the correct frequency.)
5. The call details are summarized on the
LCD screen. Press >ENT to send the call.
The radio checks the status of CH70 and
if it is busy, waits for two seconds before
rechecking.
When CH70 is free, the call is sent and the
FISHING FISHING
055555555 055555555
ROUTINE ROUTINE
>SET CHANNEL ENT>SEND?
1. Press CALL to display the first three options
of the DSC CALL menu.
2. Move the cursor to GROUP then press >ENT.
You can send a call to any one of the groups
that you have set up (see Reference Section
2 - Enter a new group MMSID.)
3. Select the group that you want to call and
then press >ENT.
4. The group name and MMSID are displayed.
Select the working channel and press >ENT.
(You cannot usually call a duplex channel so
these are automatically eliminated. If the call
is to a Coast Station the radio will recognize
this and select the correct frequency.)
5. The call details are summarized on the LCD
screen. Press >ENT to send the call. The
radio checks the status of CH70 and if it is
TX symbol appears on the LCD screen.
6. If the call is acknowledged, press PTT to talk
on the working channel.
If there is no reply, try making the call again.
(See Reference Section 3 - Retry a routine
call.)
FISHING
055555555
ROUTINE
CALLING...
busy, waits for two seconds before rechecking.
When CH70 is free, the call is sent and the TX
symbol appears on the LCD screen.
6. If the call is acknowledged, press PTT to talk
on your selected working channel. If there
is no reply, try making the call again. (See
Reference Section 3 - Retry a routine call.)
45