Sony KDL-32EX700 Service Manual page 19

3) Write data for "Digital" service mode. (
Note: This procedure operation, when replaced the B board.
Note: Do not write a wrong segment or destination information in Product ID.
When the wrong setting is written, TV may not operate.
000 SEG ・・・Product ID - segment information
001 DEST・・・Product ID – destination information
a. Change data for each model.
b. Press "0" or "enter" on remote.
It shows red "WRITE". It indicate writing is processing.
c. Writing process is done at this point.
KDL-32/40/46/52/60EX700(HONG KONG,AUSTRALIA,NEW
ZEALAND,SINGAPORE,SOUTH AFRICA,IRAN,GA-ANALOG AREA)
"002 MODEL" category)
ADJUSTMENT
DIGITAL
002 MODEL
000 SEG 01 : 2a-3
Write
SERVICE
19