Download
Share
Print this page
  1. Manuals
  2. Brands
  3. berlinger Manuals
  4. Measuring Instruments
  5. Fridge-tag 3
  6. User manual

berlinger Fridge-tag 3 User Manual

Hide thumbs Also See for Fridge-tag 3:

Advertisement

Quick Links

Download this manual See also: Operating Manual
User Guide
Fridge-tag® 3
EN

Advertisement

loading
Need help?

Need help?

Do you have a question about the Fridge-tag 3 and is the answer not in the manual?

Questions and answers

Related Manuals for berlinger Fridge-tag 3

Summary of Contents for berlinger Fridge-tag 3

  • Page 1 User Guide Fridge-tag® 3...

  • Page 2: Important Symbols

    Reading the display during measurement Important OK symbol: Alarm symbol: symbols Warning symbol: Indication of an OK display Ext. Sensor °C 1 47 In measurement mode, when no alarm has been trig- gered, the following information is indicated: • The OK symbol •...
  • Page 3 Alarm display and confirmation options (factory preset) Option 1- Alarm indication “all alarms” With this option the alarms will be visible on the display for 30 days. By pressing the READ button, the with an will be disabled for the corresponding alarms. The cannot be canceled nor reset.
  • Page 4 Confirming an alarm An alarm must be confirmed on the device directly by the device user. Confirming an alarm can only be made if the gets back within the set temperature limits. The alarm cannot be confirmed with a SMS command, only direct on the device.

  • Page 5: Audio Alarm

    Audio alarm (factory preset) In case an upper or lower alarm is triggered, 3 audible alarm signals are emitted immediately. Thereafter: • Every minute 1 alarm signal for maximally 168 hours (7 days). • After 168 hours (7 days) the buzzer will stop. •...
  • Page 6 Example of an alarm display 1st display 1 21 Press READ. The following information is indicated on the screen: • The alarm- and the warning symbol • The corresponding flashing arrow (alarm indicator) (example: Temperature out of lower alarm limit) •...
  • Page 7 Option 2: Read only alarms directly Alarm-Super-Jump function (30-day history) Press and hold READ for 3 seconds. Note: Press and hold the READ button again for at least 3 seconds and the next alarm event will appear on the screen. Option 3: Read out data with a computer Connect the device via...
  • Page 8 The Fridge-tag will now generate a PDF and ASCII report of max. 28 or 56 days (factory setting). This process may take up to 2 minutes. The continuously appearing arrows in the upper display area indicate that the device is processing. This process must not be interrupted until the OK symbol appears on the display.
  • Page 9 Status query OK Conversation with +31 123456789 Thu., 09:26 status STATUS=OK, 6.5C Fridge-tag 3 is in the OK state, the current temperature is 6.5°C and within the set alarm limits. Status query alarm Conversation with +31 123456789 Thu., 09:26 status STATUS=ALARM, 1.5C...
  • Page 10 If the error still exists, the buzzer continuously beeps at a three-minute interval for 168 hours (7 days). For more information download the whole user manual from www.berlinger.com/user-manuals. Berlinger & Co. AG Tel. +41 71 982 88 11 Mitteldorfstrasse 2 www.berlinger.com 9608 Ganterschwil...