Quickly Locating The Point You Wish To Start Playback - Easy Search; Selecting The Playback Mode - Sony LINEAR PCM RECORDER PCM-M10 Operating Instructions Manual

• When "Audio Out" in the menu is set to
"LINE OUT," do not connect headphones;
the playback sound from the headphones
will be very loud.
Quickly locating the point
you wish to start playback –
Easy Search
When "Easy Search" is set to "ON" in the
menu, you can quickly locate the point at
which you wish to start playback by
pressing FF/ or
> v
repeatedly during playback (page 77). You
can go back approx. 3 seconds by pressing
. FR/ V once, or advance approx. 10
seconds by pressing
function is useful for locating a desired
point in a long recording, such as in a
recording of musical instruments.
When tracks are played back to
z
the end of the last track
• When you play back or fast play back to the
end of the last track, "TRACK END" lights
up for approx. 5 seconds.
• When "TRACK END" goes off, the PCM
recorder will stop at the beginning of the last
track.
• If you press and hold . FR/ V while
"TRACK END" is lit, the tracks are played
FR/
. V
FF/ once. This
> v
back rapidly, and normal playback will start
at the point you release the button.
• If the last track is long and you wish to start
playback at a later part of the track, press and
hold > FF/ v to go to the end of the track,
and then press . FR/ V while "TRACK
END" is lit to go back to the desired point.
• For tracks other than the last one, go to the
beginning of the next track and play
backward to the desired point.
Selecting the playback
mode
You can select the playback mode in the
menu.
> FF/ v ,
. FR/ V
MENU
N PLAY/
ENTER
x STOP
51 GB