Sony LINEAR PCM RECORDER PCM-M10 Operating Instructions Manual page 107

Symptom
The PCM recorder does not
operate.
The PCM recorder is not
recognized by your
computer.
A folder/file cannot be
copied from your computer.
The file copied from your
computer cannot be played
back.
The computer cannot start.
Remedy
• You may have formatted the memory of the PCM recorder using a
computer. Use the PCM recorder formatting function to format
the memory (page 78).
• Disconnect the PCM recorder from your computer and reconnect
it.
• Do not use a USB hub or USB extension cable other than the
supplied USB connecting cable. Connect the PCM recorder to
your computer using the supplied USB connecting cable.
• Operation is not guaranteed if you use any system requirements
other than those described on page 95.
• Depending on the USB port position of the computer you are
using, the PCM recorder may not be recognized. If there are
multiple USB ports, try another port.
• The file format may differ from those that can be played back
using the PCM recorder (.wav/.mp3/.wma/.m4a) (page 96). Check
the file name.
• If you reboot the computer with the PCM recorder connected to
the computer, the computer may freeze or may not start properly.
Disconnect the PCM recorder from the computer and reboot the
computer again.
107 GB