Locating Quickly The Point You Wish To Start Playback (Easy Search); Playing Back A Message At A Desired Time With An Alarm - Sony ICD-P520 Operating Instructions Manual

Tip

When fast playback is done to the end of the
last message, "END" flashes 5 times. (You cannot
hear the playback sound.) If you keep –
pressed while "END" is flashing, the messages are
played back rapidly, and normal playback will
start at the point you release the button.
When "END" stops flashing and the OPR
indicator goes off, the unit will stop at the
beginning of the last message.
If the last message is long and you wish to
start playback at a later part of the message,
keep  + pressed to play back the message
to the end and then press –
flashing to go back to the desired point.
(For messages other than the last one, go to
the beginning of the next message and play
backward to the desired point.)
Locating quickly the point you
wish to start playback (Easy
Search)
When EASY-S is set to "ON" in the menu,
you can advance approx. 10 seconds by
pressing  +. This function is useful
when locating a desired point in a long
recording. ("EASY-S" is displayed in the
display window.)
2
GB


while "END" is
Playing Back a
Message at a Desired
Time with an Alarm
You can sound an alarm and start
playback of a selected message at a
desired time. If you select "B-ONLY"
in Step 6, an alarm sounds only and
playback will not start.
1
Select the folder (See "Selecting
the Folder" on page 17) and display
the message you want to play back
with an alarm.
2
Enter the alarm setting mode.
Press MENU/DISPLAY for more than
1
1 second until "MODE" appears in the
display window.
Press –  or
2
OFF"
(If the alarm has already set to the
selected message, "ALARM ON" is
displayed. If you do not wish to
change the setting, press
exit the menu mode.)
 + to select "ALARM
 STOP and