When To Replace Batteries - Sony LINEAR PCM RECORDER PCM-M10 Operating Instructions Manual

batteries, select "NiMH Battery" in the
"Battery Setting" submenu of the "Detail
Menu." With this setting, the battery
remain indicator for the rechargeable
batteries will be displayed more precisely.
See "Making Settings for the Menu" on
page 71.
Tips
z
• Even if fully-charged rechargeable batteries
are inserted, the battery indicator may not
show the full status.
• Use a charger to recharge batteries at room
temperatures.
• Use the following charger and rechargeable
batteries for the PCM recorder:
– Nickel metal hydride rechargeable battery:
NH-AA-B2K
– Quick battery charger for nickel metal
hydride rechargeable batteries:
BCG-34HS2K
14 GB

When to replace batteries

When using batteries, the battery indicator
on the display shows the battery condition.
Battery remain indication
: "Low Battery Level" appears.
Replace two old batteries with new
ones soon.
m
: "Change Battery" appears and the
PCM recorder will stop operation.
Tips
z
• Do not use manganese batteries for this PCM
recorder.
• When replacing the batteries, tracks
recorded are not deleted even when you
remove the batteries.
• When replacing batteries, the clock
continues moving for about 3 minutes after
you remove the batteries.
• When replacing batteries, turn off the power
of the PCM recorder.
• Do not mix different types of batteries.